Your #1 Source For Out Of Production, Obsolete, And Hard To Find Hard Drives
CLICK ON THE LOGO ABOVE TO CHECK PRICE AND AVAIABILITY OF THIS DRIVE.
This information is provided as-is for free and Discount Computer Peripherals, Inc. shall not be held liable for any errors or omissions
.
Native| Translation
------+-----+-----+-----
Form 2.5"/SUPERSLIMLINE Cylinders 1574| 698| |
Capacity form/unform 200/ MB Heads 5| 10| |
Seek time / track 14.5/ 3.0 ms Sector/track | 56| |
Controller IDE / AT Precompensation
Cache/Buffer 224 KB READ-AHEAD Landing Zone
Data transfer rate 2.670 MB/S int Bytes/Sector 512
8.000 MB/S ext
Recording method RLL 1/7 operating | non-operating
-------------+--------------
Supply voltage 5 V Temperature *C 5 55 | -40 70
Power: sleep W Humidity % 8 90 | 5 95
standby 0.2 W Altitude km -0.300 3.000| -0.300 12.000
idle 1.8 W Shock g 10 | 100
seek 2.5 W Rotation RPM 4500
read/write W Acoustic dBA 30
spin-up W ECC Bit 88-REED SOLOMON,ON THE FLY
MTBF h 150000
Warranty Month
Lift/Lock/Park YES Certificates
**********************************************************************
L A Y O U T
**********************************************************************
FUJITSU M2634T/35T/2636T JUMPER SETTING
+---------------------------------------------------------+
| |XX
| |XXI
| |XXN
| |XXT
| |XXE
| |XXR
| |XXF
| |XXA
| |XXC
| |XXE
| |XX
| |XX
| |XXMaster/
| |xxSlave
+---------------------------------------------------------+
**********************************************************************
J U M P E R S
**********************************************************************
FUJITSU M2634/35/36T JUMPER SETTING
Jumper Setting
==============
Master/Slave
------------
The drive only has a master/slave setting which is configured by
pins 2 & 4 of the interface connector. It should be noted that these
pins are horizontally adjacent to each other.
Pins 2-4 OPEN MASTER (Default)
CLOSED SLAVE
**********************************************************************
I N S T A L L
**********************************************************************
-ANY DIREC.
Notes on installation
=====================
Installation direction
----------------------
horizontally vertically
+-----------------+ +--+ +--+
| | | +-----+ +-----+ |
| | | | | | | |
+-+-----------------+-+ | | | | | |
+---------------------+ | | | | | |
| | | | | |
| | | | | |
+---------------------+ | +-----+ +-----+ |
+-+-----------------+-+ +--+ +--+
| |
| |
+-----------------+
The drive will operate in all axis (6 directions).
**********************************************************************
F E A T U R E S
**********************************************************************
FUJITSU MEDIA DEFECTS
Media Defects
-------------
Before the unit leaves the factory, media defects are listed on the
MEDIA DEFECT LIST. This list is written on the media in the SA space
which is a reserved area of the disk.