Your #1 Source For Out Of Production, Obsolete, And Hard To Find Hard Drives
CLICK ON THE LOGO ABOVE TO CHECK PRICE AND AVAIABILITY OF THIS DRIVE.
This information is provided as-is for free and Discount Computer Peripherals, Inc. shall not be held liable for any errors or omissions
.
Native| Translation
------+-----+-----+-----
Form 3.5"/HH Cylinders 1366| | |
Capacity form/unform 212/ MB Heads 8| | |
Seek time / track 16.0/ 5.0 ms Sector/track 38| | |
Controller SCSI1 SINGLE-ENDED Precompensation
Cache/Buffer 64 KB Landing Zone
Data transfer rate 1.500 MB/S int Bytes/Sector 512
5.000 MB/S ext SYNC
Recording method RLL 1/7 operating | non-operating
-------------+--------------
Supply voltage 5/12 V Temperature *C 5 55 | -40 60
Power: sleep W Humidity % 8 80 | 8 80
standby W Altitude km -0.061 3.050| 12.200
idle 4.2 W Shock g 5 | 50
seek 6.3 W Rotation RPM 3485
read/write 6.0 W Acoustic dBA 40
spin-up W ECC Bit
MTBF h 150000
Warranty Month
Lift/Lock/Park YES Certificates
**********************************************************************
L A Y O U T
**********************************************************************
CONNER CP3200F CUSTOMER OPTIONS
+-------------------------------------------------------+
|1-+J1 ++ |XX
|| | Serial || |XX SCSI
|| | IN/OUT +-+E3 || |XX I
|| | | |E2 ++ |XX N
|| | +-+E1 ++ |XX T J2
|+-+ TERMINATORS || |XX E
| || |XX R
| ++ |XX F
| ++ |XX A
| || |XX C
| || |XX E
| ++ |XX
| |XX1
| |
| +-J3--HDA--+ |XX Power J4
| +----------+ |XX
+-------------------------------------------------------+ 1
**********************************************************************
J U M P E R S
**********************************************************************
CONNER CP3200F CUSTOMER OPTIONS
Jumper setting
--------------
SCSI ID Jumpers
---------------
+--------------+----------+--------+--------+
| Drive Select | E1 | E2 | E3 |
+--------------+----------+--------+--------+
| 0 | OPEN | OPEN | OPEN |
| 1 | CLOSED | OPEN | OPEN |
| 2 | OPEN | CLOSED | OPEN |
| 3 | CLOSED | CLOSED | OPEN |
| 4 | OPEN | OPEN | CLOSED |
| 5 | CLOSED | OPEN | CLOSED |
| 6 | OPEN | CLOSED | CLOSED |
| 7 | CLOSED | CLOSED | CLOSED |
+--------------+----------+--------+--------+
There are three jumpers available for configuration. E1, E2, and E3
are used to select the drive's SCSI ID.
Note: SCSI parity is always enabled.
Parity
------
PARITY IS ALWAYS ENABLED! Do not connect the drive to systems which
use Parity Disabled!
J4 Power
---------
+---------+
| 1 2 3 4 |
+-+-+-+-+-+
| | | +----------- + 5V
| | +------------- GND
| +--------------- GND
+----------------- + 12V
**********************************************************************
I N S T A L L
**********************************************************************
CONNER CP3200F CUSTOMER OPTIONS
Mounting Holes
--------------
Side: 6-32 UNC-2B .15 Max. Insertion
Bottom: 6-32 UNC-2B .25 Max. Insertion