C P - 3 0 5 4 0 CONNER

Your #1 Source For Out Of Production, Obsolete, And Hard To Find Hard Drives
CLICK ON THE LOGO ABOVE TO CHECK PRICE AND AVAIABILITY OF THIS DRIVE.
This information is provided as-is for free and Discount Computer Peripherals, Inc. shall not be held liable for any errors or omissions
.
Native| Translation
------+-----+-----+-----
Form 3.5"/SLIMLINE Cylinders 2243| | |
Capacity form/unform 545/ MB Heads 6| | |
Seek time / track 10.0/ 2.0 ms Sector/track | | |
Controller SCSI2 SI/FAST Precompensation
Cache/Buffer 256 KB Landing Zone
Data transfer rate 1.250 MB/S int Bytes/Sector 512
10.000 MB/S ext SYNC
Recording method RLL 1/7 operating | non-operating
-------------+--------------
Supply voltage 5/12 V Temperature *C 5 55 | -40 60
Power: sleep W Humidity % 5 95 | 5 95
standby W Altitude km -0.061 3.048| -0.061 12.192
idle 5.2 W Shock g 5 | 75
seek 9.0 W Rotation RPM 5400
read/write 6.5 W Acoustic dBA 40
spin-up W ECC Bit
MTBF h 250000
Warranty Month 24
Lift/Lock/Park YES Certificates
**********************************************************************
L A Y O U T
**********************************************************************
CONNER CP30540 AEGEAN SCSI CUSTOMER OPTIONS
+---------------------------------------------------------+
| |XX J2
| +-+ |XX
| | |J1 |XX
| | |HDA |XX I
| | | TERMPWR|XX N
| +-+ ++ |XX T
| ++ |XX E
| |XX R
| |XX F
|J3 |XX A
|+-+Spindle Sync |XX C
||x|LED Drive E1++++++E5 |XX E
||x| ++++++ |X1
|+-+ | 1
|+-+0E1 |XX J4
||x| | |XX Power
|+-+0E5 (Alternate LED Drive) |
+---------------------------------------------------------+
**********************************************************************
J U M P E R S
**********************************************************************
CONNER CP30540 AEGEAN SCSI CUSTOMER OPTIONS
Jumper Setting
==============
E1/0E1-E3/0E3 SCSI ID
---------------------
+----------+-----------------------+
| SCSI ID | Jumpers |
| | E3/0E3| E2/0E2| E1/0E1|
+----------+-------+-------+-------+
| 0 | OPEN | OPEN | OPEN |
| 1 | OPEN | OPEN | CLOSED|
| 2 | OPEN | CLOSED| OPEN |
| 3 | OPEN | CLOSED| CLOSED|
| 4 | CLOSED| OPEN | OPEN |
| 5 | CLOSED| OPEN | CLOSED|
| 6 | CLOSED| CLOSED| OPEN |
| 7 | CLOSED| CLOSED| CLOSED|
+----------+-------+-------+-------+
There are three jumpers available for configuration of SCSI ID: E1,
E2, and E3.
Use either but not both: E1 to E3 OR 0E1 to 0E3. The 0E header is not
installed on drive configurations with a LED on the PCBA.
Delay Spin: A jumper in the E4 location, disables spin up on power-
on. Disabling spin up on application of power can also be enabled by
setting the DSPN bit in MODE SELECT page 0.
E4 Disable Spin on Power on
E5/0E5 Terminators on
TERMPWR Output Enable
**********************************************************************
I N S T A L L
**********************************************************************
CONNER CP31370 BAJA SCSI/CP30540 AEGEAN SCSI CUSTOMER OPTIONS 1993
Mounting Holes
--------------
Side: 6-32 UNC-2B .15 Max. Insertion
Bottom: 6-32 UNC-2B .25 Max. Insertion
J4 DC Power and pin connector assignments
-------------------------------------------
-------------------+
--+ +-----J4-----+| pin 1 +12 V
1| | 1 2 3 4 || pin 2 +12 Volts Return
-+ +------------+| pin 3 + 5 Volts Return
------------------+ pin 4 + 5 V