C F N - 2 5 0 S CONNER

Your #1 Source For Out Of Production, Obsolete, And Hard To Find Hard Drives
CLICK ON THE LOGO ABOVE TO CHECK PRICE AND AVAIABILITY OF THIS DRIVE.
This information is provided as-is for free and Discount Computer Peripherals, Inc. shall not be held liable for any errors or omissions
.
Native| Translation
------+-----+-----+-----
Form 2.5"/SUPERSLIMLINE Cylinders 1339| | |
Capacity form/unform 252/ MB Heads 6| | |
Seek time / track 12.0/ 2.0 ms Sector/track | | |
Controller SCSI1 SINGLE-ENDED Precompensation
Cache/Buffer 32 KB Landing Zone
Data transfer rate 3.000 MB/S int Bytes/Sector 512
8.000 MB/S ext
Recording method RLL 1/7 operating | non-operating
-------------+--------------
Supply voltage 5 V Temperature *C 5 55 | -40 60
Power: sleep 0.2 W Humidity % 5 90 | 5 90
standby 0.2 W Altitude km -0.061 3.048| -0.061 4.500
idle 1.0 W Shock g 10 | 200
seek 1.1 W Rotation RPM 4500
read/write 1.4 W Acoustic dBA 34
spin-up W ECC Bit
MTBF h 150000
Warranty Month
Lift/Lock/Park YES Certificates
**********************************************************************
L A Y O U T
**********************************************************************
CONNER CFN-170S/250S QUICK REFERENCE GUIDE REV. C, DEC. 94
+---------------------------------------------------------+ I
| +-+ |XX N
| | | |XX T
| | | |XX E
| | | |XX R
| | | |XX F
| +-+ |XXJ2 A
| |XX C
| |XX E
| |XX /
| |XX P
| |XX O
| |XX W
| |XX E
| | 1 R
| |XX J3
| |XX
+---------------------------------------------------------+ 1
**********************************************************************
J U M P E R S
**********************************************************************
CONNER CFN-170S/250S QUICK REFERENCE GUIDE DEC. 94, REV. C
Jumper Setting
==============
J3 SCSI ID/LED
--------------
+---J3---------
| o o o o o o o o
| 1 o o o 1 o o o o o
-+--------------J2--------
+--------+-----+-----+-----+
|J3, Pin | 5 | 6 | 7 |
+--------+-----+-----+-----+
|SCSI ID | E1 | E2 | E3 |
+--------+-----+-----+-----+
| 0 |high |high |high |
+--------+-----+-----+-----+
| 1 |low |high |high |
+--------+-----+-----+-----+
| 2 |high |low |high |
+--------+-----+-----+-----+
| 3 |low |low |high |
+--------+-----+-----+-----+
| 4 |high |high |low |
+--------+-----+-----+-----+
| 5 |low |high |low |
+--------+-----+-----+-----+
| 6 |high |low |low |
+--------+-----+-----+-----+
| 7 |low |low |low |
+--------+-----+-----+-----+
LED Attachment
--------------
+5V
o
|
<
> Current limiting
|
\ /
-+- LED
|
o
J3, Pin 8, -LED
Mounting Holes
--------------
Side: 3mm x 0.5mm THD (4x) 4mm max. Insertion
Bottom: 3mm x 0.5mm THD (4x) 4mm max. Insertion
(signal) (pin) (signal)
+----------+ pin
RESERVED (NC) | 1 2 | RESERVED (ND) ID1 ID2 ID4
RESERVED (NC) | 3 4 | RESERVED (ND) ID+-----------
ID1- | 5 6 | ID2- 0 | H H H
ID4- | 7 8 | LED 1 | L H H
+----------+ 2 | H L H
+----------+ 3 | L L H
+5V | 1 2 | +5V 4 | H H L
+5V Ret | 3 4 | +5V Ret 5 | L H L
Ground | 5 6 | DB0- 6 | H L L
Ground | 7 8 | DB1- 7 | L L L
Ground | 9 10| DB2-
Ground | 11 12| DB3- H = high
Ground | 13 14| DB4- L = low
Ground | 15 16| DB5-
Connector Key | no pin 18| DB6-
Ground | 19 20| DB7-
Ground | 21 22| Parity-
Ground | 23 24| TRMPWR
ATN- | 25 26| BSY-
Ground | 27 28| ACK-
RST- | 29 30| MSG-
Ground | 31 32| SEL-
I/O- | 33 34| C/D-
Ground | 35 36| REQ-
+5V Ret | 37 38| +5V Ret
+5V | 39 40| +5V
+----------+